21 SEER 24,000 BTU Wi-Fi Ductless Mini Split Air Conditioner and Heat Pump Variable Speed Inverter - 220V/60Hz
A mini-split air conditioner is a highly efficient, ductless heating and cooling system that directly regulates the temperature in individual rooms or zones. Unlike traditional central HVAC systems, mini-splits consist of an outdoor compressor/condenser unit and one or more indoor air handling units, connected by a conduit. This setup allows for easy installation, minimal disruption, and flexible placement options. Mini-split systems are renowned for their energy efficiency, quiet operation, and the ability to provide personalized comfort by controlling the climate in specific areas, making them an ideal solution for homes without ductwork, room additions, or spaces requiring independent temperature control.
About This Product
Make your home feel cooler with this DuctlessAire 24,000 BTU Wi-Fi ductless mini split air conditioner and heat pump. The 20.5 SEER rating allows energy efficiency for lower costs. It comes with a Wi-Fi capable module for convenience. Electroplated coils resist salty air, and other corrosive elements, enabling lasting use.
Highlights
- 20.5 SEER rating, Energy Star-certified with an estimated national average annual operating cooling cost of $148 based on AHRI certificate #9150140
- Stylish interior white wall-mount air handler
- 25-ft. kit includes copper tubing with insulation and nuts, control wire, 6 ft. drain hose, wall sleeve, wall sleeve cover and tape
- Electroplated coils withstand the effects of salty air, rain and other corrosive elements
- Special built-in low ambient kit can be used in temperatures as low as 5 deg. F for cooling operation
- Refrigerant leak detection will alarm when a refrigerant leak is detected
- Temperature sensor on remote control
- Includes one HEPA filter that traps harmful particles such as pollen, pet dander, dust mites and tobacco smoke
- Air vane switches directions from heating to cooling
- Built-in electronic diagnostic monitors abnormal operations or parts failures
- Heating belt fitted on the base plate of the outdoor unit to avoid accumulation of rain, snow or water on the base plate
- Dual washable filters remove most pollen dust, smoke and other microscopic airborne particles
- Automatically clean the evaporator to reduce build-up of bacteria and keeps the air fresh
- Sleep mode decreases heating or increases cooling by one deg. per hour for the first two hours of use, then holds the temperature steady for five hours
- Large diameter cross flow fan can bring down the indoor unit noise level by lowering the fan speed
- Anti-cold draft warms up prior to fan operation to prevent cold air in heating mode
- Louver position memory stored by microcomputer
- Turbo mode enables the unit to reach the preset temperature in the shortest time
Understanding This System's Key Technologies
Inverter Technology: Why It Matters More Than the SEER Number Alone
The "variable speed inverter" in this unit's name refers to a compressor that continuously adjusts its output to match cooling or heating demand, rather than cycling fully on and off like older fixed-speed mini splits. This is what makes the 20.5 SEER rating achievable — inverter compressors avoid the energy spikes associated with repeated full-power startups, run more quietly, and maintain steadier indoor temperatures with less fluctuation than single-speed systems.
Built-In Low Ambient Kit: A Genuine Cold-Climate Feature
For Illinois homeowners, the low ambient kit rated for cooling operation down to 5°F is a meaningful detail — most standard mini splits are not designed to reliably cool at such low outdoor temperatures (rarely needed, but relevant for shoulder-season cooling in server rooms, sunrooms, or similar spaces). More importantly, the system's heating belt on the outdoor unit's base plate prevents rain, snow, or meltwater from accumulating and freezing around the unit — a practical safeguard against a common cold-climate failure point for outdoor HVAC equipment.
Air Quality Features Beyond Basic Filtration
- HEPA filter — traps fine particulates including pollen, pet dander, dust mites, and tobacco smoke, offering meaningfully finer filtration than standard washable filters alone
- Dual washable filters — provide an additional, reusable layer of particulate capture, reducing the frequency of replacement filter purchases
- Automatic evaporator cleaning — helps prevent bacterial buildup on the evaporator coil, which can otherwise become a source of musty odors or reduced air quality over time
Built-In Diagnostics and Safety Features
- Refrigerant leak detection — actively alarms if a leak is detected, catching a problem that might otherwise go unnoticed until performance noticeably degrades
- Electronic diagnostic monitoring — flags abnormal operation or component failures, which can help a technician diagnose issues faster during service calls
- Electroplated coils — provide corrosion resistance against salty air, rain, and other environmental elements, extending the outdoor unit's operational lifespan
Comfort-Oriented Design Details
- Anti-cold draft function — pre-warms the system before the fan activates in heating mode, preventing the brief blast of cold air that older heat pump systems are known for
- Sleep mode — gradually ramps temperature by one degree per hour for the first two hours, then holds steady, mimicking how a thoughtful person might manually adjust a thermostat overnight
- Turbo mode — allows the system to reach a set temperature quickly when needed, useful for rapidly cooling or warming a room after arriving home
- Large diameter cross-flow fan — enables lower noise operation at reduced fan speeds compared to smaller fan designs
Why Ductless Makes Sense for Certain Spaces
Because this system requires no ductwork, it's particularly well suited for:
- Room additions or sunrooms where extending existing ductwork is impractical or costly
- Older homes without central ductwork, avoiding the expense of installing a full duct system
- Finished basements or attic conversions needing independent temperature control from the rest of the home
- Garages, home offices, or accessory spaces where a dedicated, efficient comfort solution makes more sense than extending central HVAC
Installation Considerations
The system includes a 25-foot line set kit with copper tubing, insulation, control wire, drain hose, and wall sleeve components — but correct refrigerant line routing, electrical connection (220V/60Hz), and proper mounting of both indoor and outdoor units directly affect long-term performance and efficiency. Our licensed HVAC technicians will:
- Determine optimal indoor unit placement and outdoor unit location for airflow and drainage
- Install and insulate the refrigerant line set correctly to prevent efficiency loss
- Complete the 220V electrical connection per code
- Configure Wi-Fi connectivity and test the refrigerant leak detection system
- Verify heating belt function and low ambient kit operation ahead of winter
Frequently Asked Questions
Can one outdoor unit support multiple indoor units?
This specific model is a single-zone system with one indoor air handler; multi-zone mini split configurations with multiple indoor units are available separately if you need to condition several rooms independently.
How cold can this system heat effectively?
While the low ambient kit primarily supports cooling operation to 5°F, heating performance in extreme cold varies by model; our technicians can advise whether a backup heat source is recommended for your specific installation.
Does the HEPA filter need to be replaced, or is it washable?
The HEPA filter is a separate, replaceable component from the dual washable filters; our technicians can advise on replacement intervals based on usage and local air quality.
With multiple locations throughout North Shore and Northwest suburbs of Chicago, Illinois, Emergency Plumbing offers promt and professional plumbing services.
Are you looking for a reliable plumber near me in the Arlington Heights, Bannockburn, Barrington, or surrounding areas?
Our local plumbing company offers expert services, catering to all your needs. Whether you're in the heart of Buffalo Grove, the serene streets of Deerfield, or require an emergency plumber in Des Plaines or Elk Grove Village, we are here to help. Our plumbing contractors are well-versed in the unique plumbing systems of Glencoe, Glenview, Hawthorn Woods, and Highland Park.
For those in Highwood, Hoffman Estates, or the quaint town of India Creek, our team guarantees prompt and efficient service.
Residents of Inverness, Kildeer, Lake Bluff, Lake Forest, and Lake Zurich can also rely on our expertise. We extend our services to Long Grove, Mettawa, Lincolnshire, Mount Prospect, Mundelein, Northbrook, and Palatine.
Need a plumber in Prospect Heights, Ravinia, RiverWoods, Rolling Meadows, Vernon Hills, Wauconda, Wheeling, Wilmette, or Winnetka? Look no further! As a trusted plumbing contractor, we ensure that your plumbing issues are solved quickly and efficiently, keeping your home or business running smoothly.
