Home » Zoeller Ejector Pump M-267 0.5HP
Description
May be used in those states where codes do not restrict solids size in effluent systems.
Features:
- Float operated, submersible (NEMA 6) 2-pole mechanical switch
- Durable cast construction, ASTM Class 25 cast iron, switch case and pump housing
- Cast iron base on models 267 and 268
- Engineered plastic base on model 266
- Non-Clogging Vortex Impeller Design. Engineered plastic impeller with metal inserts on models 266, 267 & 268 (1 PH).
- Not affected by materials normally found in drainage and sewage pumps
- Stainless steel screws, bolts, handle, guard and arm and seal assembly
- Neoprene square ring & gasket
- Oil-filled, hermetically sealed motor
- Oil lubricated bearings
- Carbon and ceramic shaft seal
- Passes 2" spherical solids
- 2" NPT discharge
- On point: 12" (automatic units); Off point: 4" (automatic units)
- Corrosion resistant powder coated epoxy finish
- Completely submersible
- Watertight and dust tight
- Automatic reset thermal overload protection (1 Phase only)
- Reserve powered design. For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.
Specs
| Type: |
Automatic |
|---|---|
| Application: |
Sewage Sewage Waste Transfer Effluent |
| Material: |
Cast Iron |
| Horse Power: |
1/2 |
| Voltage: |
115V |
| Amperage: |
10.4 |
| Phase: |
1 |
| RPM: |
1725 |
| Cord Length: |
10' |
| Cord Type: |
UL Listed, 3-Wire Neoprene Cord & Plug |
| Height: |
14-9/32" |
| Features: |
w/ Plastic Impeller |
| Flow at 5 FT Head: |
128 GPM |
| Flow at 10 FT Head: |
89 GPM |
| Flow at 15 FT Head: |
50 GPM |
| Approvals: |
UL/CSA |
| Weight (lbs): |
47.5 lbs |
| Discharge: |
2" |
| Solids Size: |
2" |
| Shutoff Head (ft.): |
21.5' |
Product Details
- Brand ZOELLER Manufacturer Part Number M267
- HP 1/2
- Rated Voltage 115V AC
- Phase - Pumps 1
- Amps 10.40
- Motor Type Hermetically-Sealed; Oil-Filled
- Body Material Cast Iron
- Impeller Material Thermoplastic
- Shaft Seal Material - Pumps Carbon; Ceramic
- Switch Actuation Vertical Float
- Switch Electrical Connection Integral
- On Point 12 in
- Off Point 5 in
- Flow Rate @ 10 Ft. of Head 85 gpm
- Flow Rate @ 15 Ft. of Head 45 gpm
- Flow Rate @ 20 Ft. of Head 10 gpm
- Max. Diameter Solids 2 in
- Min. Sump Pit Dia. 18 in
- Body Dia. 13-1/16 in
- Overall Height 14-9/32 in
- Cord Length 10 ft
- Discharge 2 in FNPT
- Max. Liquid Temp. 130 °F
- Max. Head 21.5 ft
- Duty Cycle Continuous
- Thermal Protection Yes
- RPM 1,725 RPM
- Agency Compliance CSA Certified; UL Listed
- Manufacturers Warranty Length 3 yr
- UNSPSC 40151517
- Country of Origin USA (subject to change)
