SIMPLEX PIVOT PRO CONTROL PANEL, 2.5-4.0 AMPS
The Simplex Pivot Pro Control Panel for 200/230/460 V, 3 Ph lift station pump applications ranging from 2.5-4.0 Amps. The panel comes with an LCD interface and built-in audible and visual alarms. Now you can get Zoeller quality in the whole system by pairing a pump with our highly featured Pivot Pro Control Panel. The panel enclosure is NEMA 4X so it is able to be used outdoors and will withstand a variety of weather conditions
FEATURES AND BENEFITS
- RED/AMBER/GREEN LEDs for float switch indicators, Pump Run, High Water, System Ready, and HOA functions
- Ample room within the panel around the terminal block for field wiring
- TEST toggle will check all LEDs, globe, and horn
- Z Control® enabled (requires Wi-Fi Gateway 90002-0001)
- Lockable LCD menu allows for easy access to status, counters, and settings
- Adjustable settings
- Seal fail indicator/alarm for each pump (feature requires moisture sensor in pump)
- Thermal trip indicator/alarm for each pump (feature requires thermal sensor in pump)
- Lead/lag selector with pump run ratio settings
- Float switch logic choices: Smart or Relay, 3 or 4 float, SLLH or SLHL
- 5-year limited warranty: this model comes with warranty coverage from Zoeller Pump Company, giving you extra protection and more peace of min
What Is a Lift Station Control Panel — And Why It Matters
The Role of a Control Panel
A lift station (or pump station) moves wastewater or stormwater uphill when gravity alone can't get it to the sewer main or septic system — common in basements below the sewer line, commercial properties, and low-lying areas. The control panel is the "brain" of that system: it decides when pumps turn on and off, monitors for faults, and alerts you before a small problem becomes a sewage backup or flooded pit.
The Simplex Pivot Pro controls a single pump (as opposed to a "Duplex" panel, which alternates between two pumps) and is built for demanding 3-phase commercial and light-industrial applications.
Who Needs This Panel
- Property owners or managers with a single-pump lift station in the 2.5–4.0 amp, 200/230/460V 3-phase range
- Commercial buildings, multi-family properties, or facilities where pump failure risks sewage backup, code violations, or business interruption
- Installations located outdoors or in exposed areas, where a rugged, weatherproof enclosure is required
Breaking Down the Key Features
LCD Interface & Status LEDs
The lockable LCD menu gives on-site staff (or your service technician) instant access to system status, run counters, and configurable settings — no guesswork about what the pump is doing. Color-coded RED/AMBER/GREEN LEDs indicate float switch position, pump run status, high-water conditions, system readiness, and Hand-Off-Auto (HOA) mode at a glance.
Z-Control Remote Monitoring
Like other Zoeller Z-Control-enabled products, this panel can connect to the Zoeller Wi-Fi Gateway (model 90002-0001, sold separately) to deliver remote alerts — so a fault or high-water event doesn't go unnoticed simply because no one is on-site.
Built-In Diagnostics
- Seal fail indicator — alerts you the moment a pump's seal is compromised (requires a moisture sensor in the pump), often catching a problem before it causes motor damage
- Thermal trip indicator — flags pump overheating before a full motor burnout occurs (requires a thermal sensor in the pump)
- TEST toggle — lets you verify all LEDs, the strobe/globe, and the audible horn are functioning correctly during routine maintenance
Flexible Float Switch Logic
The panel supports multiple float configurations (Smart or Relay logic; 3 or 4 float setups; SLLH or SLHL sequencing), allowing it to be matched to a wide range of pit sizes and pump arrangements rather than forcing a one-size-fits-all setup.
NEMA 4X Outdoor-Rated Enclosure
Rated for outdoor installation, the enclosure resists rain, dust, and corrosion — an important consideration for lift stations located outside a building envelope.
Installation & Service Considerations
Because this panel operates on 3-phase power up to 460V and integrates seal-fail and thermal-trip sensors, installation should always be handled by a licensed electrician or plumbing contractor familiar with lift station wiring codes. Our team will:
- Confirm your pump's amperage draw falls within the 2.5–4.0 amp range this panel supports
- Wire and configure the correct float switch logic for your specific pit and float setup
- Set up and test seal-fail and thermal-trip alarms (if your pump includes those sensors)
- Optionally install the Z-Control Wi-Fi Gateway for remote monitoring
- Walk you through the LCD interface and TEST function before completing the job
Frequently Asked Questions
Can this panel run two pumps?
No — this is a Simplex (single-pump) panel. For two-pump alternating systems, a Duplex panel is required.
Is Wi-Fi required for the panel to function?
No. Core alarm and control functions work without Wi-Fi. The Wi-Fi Gateway is only needed for remote Z-Control notifications.
What's the difference between "Smart" and "Relay" float logic?
Relay logic uses simple mechanical float switching, while Smart logic uses the panel's onboard intelligence to interpret float signals — offering more flexible configuration for complex pit setups. Our technicians can recommend the right option based on your pit design.
Founded in the family basement in 1939, Zoeller Pump Company is one of the oldest family-owned water pump manufacturers in North America. Headquartered in Louisville, KY, we proudly excel with fourth-generation leadership and an expanding workforce.
Over the past seven decades, Zoeller Pump Company has established itself as a dependable leader in the wastewater industry. Through continuous research and development, we are always improving our products and processes to provide the highest possible quality to our loyal customers and end users.
This dependability is backed by a family commitment to add value for our customers and provide genuine support before, during, and after a sale.
With multiple locations throughout North Shore and Northwest suburbs of Chicago, Illinois, Emergency Plumbing offers promt and professional plumbing services.
Are you looking for a reliable plumber near me in the Arlington Heights, Bannockburn, Barrington, or surrounding areas?
Our local plumbing company offers expert services, catering to all your needs. Whether you're in the heart of Buffalo Grove, the serene streets of Deerfield, or require an emergency plumber in Des Plaines or Elk Grove Village, we are here to help. Our plumbing contractors are well-versed in the unique plumbing systems of Glencoe, Glenview, Hawthorn Woods, and Highland Park.
For those in Highwood, Hoffman Estates, or the quaint town of India Creek, our team guarantees prompt and efficient service.
Residents of Inverness, Kildeer, Lake Bluff, Lake Forest, and Lake Zurich can also rely on our expertise. We extend our services to Long Grove, Mettawa, Lincolnshire, Mount Prospect, Mundelein, Northbrook, and Palatine.
Need a plumber in Prospect Heights, Ravinia, RiverWoods, Rolling Meadows, Vernon Hills, Wauconda, Wheeling, Wilmette, or Winnetka? Look no further! As a trusted plumbing contractor, we ensure that your plumbing issues are solved quickly and efficiently, keeping your home or business running smoothly.
